|
I don't have bags, just a straight coil-over kit. I beleive the spring rate is #450lbs per side. I'm not sure the total amount that it has been lowered. If someone could give me a frame to axle measurement on a factory height truck with good springs that would help. Mine has about 2 inches between the top of the tube and the factory stop. I removed the stop and the bracket to put on a lower profile stop like in the summit catalog. I think i could squeeze out about 3.5 inches then. The coilovers are pretty stiff and fully adjustable. I'm planning on running about a 30 inch tall tire so that means I will have to keep the back down low to keep the truck sitting right.
|