The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tx Firefighter · 12-28-2004, 09:45 AM

I converted a 6 cylinder truck to V8 and 700r4. The original driveshaft on the truck was a 1 piece shaft.

By the time I moved the engine forward and put the V8 frame stands in and then the 700R4 being longer, the stock driveshaft worked perfectly. No mods needed. Mine was an origianl 3 speed truck too by the way.

12-28-2004, 09:45 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I converted a 6 cylinder truck to V8 and 700r4. The original driveshaft on the truck was a 1 piece shaft. By the time I moved the engine forward and put the V8 frame stands in and then the 700R4 being longer, the stock driveshaft worked perfectly. No mods needed. Mine was an origianl 3 speed truck too by the way. __________________ I'm on the Instagram- @Gearhead_Kevin