The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 01-23-2005, 06:28 PM

If you have any amount of lift the bushing in the tail cone will wear out prematurely, thus letting the slip part of the shaft to move more than it should.
Or is you wnat to spend some money you could get a slip yoke eliminator kit from JB conversions and never worry about it again. I will be alot stronger also.

01-23-2005, 06:28 PM	#3
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,717	If you have any amount of lift the bushing in the tail cone will wear out prematurely, thus letting the slip part of the shaft to move more than it should. Or is you wnat to spend some money you could get a slip yoke eliminator kit from JB conversions and never worry about it again. I will be alot stronger also. Last edited by kwmech; 01-23-2005 at 06:30 PM.