The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SanitysBane · 02-03-2005, 12:53 AM

Well well well, sence I have roller rockers one of my set screws came out when i did a burn out at 6,000 RPM for a little bit. The screw came out and lodge between the hole in the liffter valley and the exhaust lobe for the #8 cyliner and broke it in too. We were able to fish out the other half of the camshaft. So the truck should be running. And here are the pictures!(sorry none of the burnout)

02-03-2005, 12:53 AM	#13
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Well well well, sence I have roller rockers one of my set screws came out when i did a burn out at 6,000 RPM for a little bit. The screw came out and lodge between the hole in the liffter valley and the exhaust lobe for the #8 cyliner and broke it in too. We were able to fish out the other half of the camshaft. So the truck should be running. And here are the pictures!(sorry none of the burnout) Attached Images __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer