The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

70 Jimmy · 07-15-2002, 05:54 PM

The "drip deflectors" mount to the top, not the windshield frame. They are sheet metal type screws that go into the fiberglass. I think there are 3 each. It's a bit cheezy the way they did this. Your top is contoured to match the deflectors shape. Alot of people don't even run them, depending on how well your seals and top seal out the water. Make sure your "Blazer" door weather strip pieces are good. These mount to the top of the windsheild pillars with 3 screws each and run down across the rocker to the back and meet up with the rear door weather strip. Hope this helps.

07-15-2002, 05:54 PM	#4
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	The "drip deflectors" mount to the top, not the windshield frame. They are sheet metal type screws that go into the fiberglass. I think there are 3 each. It's a bit cheezy the way they did this. Your top is contoured to match the deflectors shape. Alot of people don't even run them, depending on how well your seals and top seal out the water. Make sure your "Blazer" door weather strip pieces are good. These mount to the top of the windsheild pillars with 3 screws each and run down across the rocker to the back and meet up with the rear door weather strip. Hope this helps. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"