The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

drink2mny · 02-07-2005, 03:33 PM

Ok most of you know about the website that I take care of.(check SIG)

I was talking with the owner and he believes he has come up with a larger size rotor to work on the 14 bolts. A 13" compared to 12 1/2". Now what would also change is our kits wouldn't require a spacer between the axle flange and bracket.

We are going to check on the feasability of still running a 15" wheel with this new idea.

So what we have done away with will be the spacer. Thats all.
No bending of the brackets. Direct bolt on..

We would still sell the older kit, but just want an idea what you guys think..

Thanks

02-07-2005, 03:33 PM	#1
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Opinions wanted Ok most of you know about the website that I take care of.(check SIG) I was talking with the owner and he believes he has come up with a larger size rotor to work on the 14 bolts. A 13" compared to 12 1/2". Now what would also change is our kits wouldn't require a spacer between the axle flange and bracket. We are going to check on the feasability of still running a 15" wheel with this new idea. So what we have done away with will be the spacer. Thats all. No bending of the brackets. Direct bolt on.. We would still sell the older kit, but just want an idea what you guys think.. Thanks __________________ Support The Board Last edited by drink2mny; 02-07-2005 at 03:43 PM.