|
I guess it would depend on cost of the new rotors. 3/4 ton front rotors new are only 20ish. Are we talking in this ball park? Also to consider is most of the time the rear brakes need to have something to reduce pressure so with the 12.5" your not getting the full pressure, of course loosing the spacers would be a greater gain in leverage on the bracket. Bracket cost could be reduced that's a good thing. So much to consider. past me a PBR!
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.
1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|