The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**71swb4x4** · 02-27-2005, 05:13 PM

I did the converstion to mine. The new bulbs should plug into your existing wiring harnes.
I added relays to mine. I wanted to be certain I was getting all the juice I needed, and I didn't want to fry the original wire, I stepped up to higher wattage bulbs.
There may be an FAQ on this that will give you better info. If there isn't - you should make one when you do your swap

02-27-2005, 05:13 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	I did the converstion to mine. The new bulbs should plug into your existing wiring harnes. I added relays to mine. I wanted to be certain I was getting all the juice I needed, and I didn't want to fry the original wire, I stepped up to higher wattage bulbs. There may be an FAQ on this that will give you better info. If there isn't - you should make one when you do your swap __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.