The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How do you keep your stock exhaust on the collector?

**COBALT** · 02-28-2005, 02:11 AM

I remember ole Stacy on Trucks showing a product on his show one time (usually I dismiss the products as wildly out of reach) that I thought was interesting.

They were these clamps that go around your collectors and essentially vice the thing together. It still used 3 bolts, but they were contained in a housing that provided uniform compression to the collector. Seemed like with the right bolts you could tighten those things down and they'd never leak.

I don't remember the vendor though...anyone remember what I'm talking about?

02-28-2005, 02:11 AM	#7
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I remember ole Stacy on Trucks showing a product on his show one time (usually I dismiss the products as wildly out of reach) that I thought was interesting. They were these clamps that go around your collectors and essentially vice the thing together. It still used 3 bolts, but they were contained in a housing that provided uniform compression to the collector. Seemed like with the right bolts you could tighten those things down and they'd never leak. I don't remember the vendor though...anyone remember what I'm talking about? __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.