Quote:
Originally Posted by Longhorn Man
...tighten the small philips screw retaining the lever. You'll want to inspect the plastic that the screw goes into, becouse it is very common for that plastic to split making it imposable to tighten.
|
Ok, since this one seems to have played out, and passthebuck may learn he has my same problem, let me ask a related question.
Indeed the plastic thingy was broken under the screw, so we replaced just that top yoke with a kit from the Help! section.
Problem is, the PO used a sheet metal screw to hold the signal lever in the hole, and it is stripped. I suspect it was originally machine threads, but now I can't get any screw/bolt to grab in that hole.
Recommendations? What is that screw supposed to be, and what does it thread into? What will need to be replaced?
Thanks...SSOW