The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JJR · 03-10-2005, 12:58 PM

To my knowledge (and looking at Hollander), there was only one manual transmission bellhousing used on 68-72 Trucks no matter what engine/trans was installed. The 67 model used the same bellhousing as the 65-66 truck. Also, a 10" clutch only came on 6cyl trucks (the 6cyl HD clutch was 11"). All V-8's got a minimum of an 11" and some got HD 12" clutches. Hope this helps.

03-10-2005, 12:58 PM	#2
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	To my knowledge (and looking at Hollander), there was only one manual transmission bellhousing used on 68-72 Trucks no matter what engine/trans was installed. The 67 model used the same bellhousing as the 65-66 truck. Also, a 10" clutch only came on 6cyl trucks (the 6cyl HD clutch was 11"). All V-8's got a minimum of an 11" and some got HD 12" clutches. Hope this helps. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed