The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 700r4

incoma · 03-11-2005, 10:16 PM

I recommend working the tranny like mooneyes4b says. You can also use a 2x4 to "space" between the tailshaft and the cross member while you unbolt the pan.

03-11-2005, 10:16 PM	#4
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	I recommend working the tranny like mooneyes4b says. You can also use a 2x4 to "space" between the tailshaft and the cross member while you unbolt the pan.