The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Russell · 03-14-2005, 12:24 AM

Yep, 3/4 ton crossmember will work just fine, they are a wee bit thicker, but identical otherwise.

I might have the one from my 80 when I swapped a blazer tank into it using the factory blazer brackets (didn't work well, the tank sat at an angle) if you need it in a hurry.

03-14-2005, 12:24 AM	#10
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Yep, 3/4 ton crossmember will work just fine, they are a wee bit thicker, but identical otherwise. I might have the one from my 80 when I swapped a blazer tank into it using the factory blazer brackets (didn't work well, the tank sat at an angle) if you need it in a hurry. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)