View Single Post
Old 03-28-2005, 12:53 PM   #8
jlhusa1
Registered User
 
Join Date: Mar 2005
Posts: 15
For future info- The correct way to do this is to thread a Blue Point YA 2220 onto the spindle. Then thread a slide hammer into the tool. A couple of good whacks with the slide hammer and the spindle will come right out with no damage to the threads or anything else. The Blue Point YA 2220 is availble through any Snap-On tool dealer. It has 3 different thread diameters inside it so it will work on Chevys, Fords, Dodges and Jeeps as well.
jlhusa1 is offline   Reply With Quote