The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Big Blue · 04-06-2005, 12:02 AM

thanks Truckstuff, That will be great. Its hard to see ahead sometimes on what the end results will look like. I was trying to vision what it would look like without the bed in my presence, hard for me to do since this is the first time attemping this.

This is what I have done so far>>>>>

Got an 81 truck, took off the cab, waiting to patch,sandblast,paint,rewire,etc...
Stripped a blazer down to the frame. Scrapped the blazer.
Had Frame sand blaster and primered/painted....my choice: SILVER.
Dropped suspension, removed leaf bushings, painted unit BLACK.
Painted all the extra metal parts,oil pan,brackets,engine parts,front rad clip.
MUCH,MUCH,MUCH to do...

Thanks John

04-06-2005, 12:02 AM	#10
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	thanks Truckstuff, That will be great. Its hard to see ahead sometimes on what the end results will look like. I was trying to vision what it would look like without the bed in my presence, hard for me to do since this is the first time attemping this. This is what I have done so far>>>>> Got an 81 truck, took off the cab, waiting to patch,sandblast,paint,rewire,etc... Stripped a blazer down to the frame. Scrapped the blazer. Had Frame sand blaster and primered/painted....my choice: SILVER. Dropped suspension, removed leaf bushings, painted unit BLACK. Painted all the extra metal parts,oil pan,brackets,engine parts,front rad clip. MUCH,MUCH,MUCH to do... Thanks John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.