The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Wanted

Paul72 · 04-22-2005, 10:14 AM

Thank you, Yukon!

Just a couple of clarification questions:

Is the plate 5" X 4"? Can't tell if that's a 5.

Also, are the 61" and 46" dimensions from the inside or outside of the pipe?

And the 33.5" and the 41.25" from the floor or plate? To the bottom or top of the pipe?

Last question - what is the thickness of the plates? I would guess 1/2".

Sorry for the questions, it's the engineer coming out in me. I do appreciate your time and trouble!

Thanks again,

Paul

EDIT: I also would need the vertical dimension behind the wheel well. THANKS!

04-22-2005, 10:14 AM	#7
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Thank you, Yukon! Just a couple of clarification questions: Is the plate 5" X 4"? Can't tell if that's a 5. Also, are the 61" and 46" dimensions from the inside or outside of the pipe? And the 33.5" and the 41.25" from the floor or plate? To the bottom or top of the pipe? Last question - what is the thickness of the plates? I would guess 1/2". Sorry for the questions, it's the engineer coming out in me. I do appreciate your time and trouble! Thanks again, Paul EDIT: I also would need the vertical dimension behind the wheel well. THANKS! __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958 Last edited by Paul72; 04-22-2005 at 10:17 AM.