|
I have a pair.. THey are not very good. These things costs a few hundred bucks and the pirch that the spring sits in is too wide. The welds are sloppy... They have a big square base that bolts up where the other a arm went but you can't get full headers in there very good after you put it in. I actually had to bend my ceramic coated headers a little and it was a *****. Your better off with either drop spindles and springs or bags.. there are too many choices to go with other than the tube a arms like I got. It only drops her about 2 1/2 anyway and they are not very attractive. Unless you know of several brands.. The one I got is from LMC. let me know if you guys know of another set .. I'm gettn rid of mine.
|