|
Well it's a aluminum filler for the coroner so it's kinda hard to weld it to steel. I think a small amount of black urathane would be a good idea. I did not do it to mine but now that it have been talked about I think it would be a good Idea..
I would advise to tape the entire window opening up with a masking tape like the Green 3M. To prevent paint chips. Don't strech the window setting tape it wil cause a little play in the window side to side. I would also use the urathane to hold the front window channel guide in the steel track. And dontr peel the chrome strip off the vent window.You may need to cut the bolt shorter that holds the rear channel in place. I drilled a hole thru the front of the scraper's to hold them from getting dragged down when you roll the window down. It's kinda trickey to get the drillin there but doable.
Oh and grow a extra set of arms to help you install the side window.
|