The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jamal · 05-15-2005, 10:30 PM

I have a 1970 model gmc ton with a straight 6 292 engine that my grandad gave me, and am trying to fix it up. My question is what parts do I need to bolt a 350 into the truck and use the factory four speed with granny first. I have the mounts and manifolds for the engine, but really wanted to know about the bellhousing and if I need to change it, and anything else I may have looked over like clutch linkages ect

05-15-2005, 10:30 PM	#1
jamal Registered User Join Date: Apr 2005 Location: Bridgeport, AL Posts: 363	engine swap question I have a 1970 model gmc ton with a straight 6 292 engine that my grandad gave me, and am trying to fix it up. My question is what parts do I need to bolt a 350 into the truck and use the factory four speed with granny first. I have the mounts and manifolds for the engine, but really wanted to know about the bellhousing and if I need to change it, and anything else I may have looked over like clutch linkages ect Last edited by jamal; 05-16-2005 at 07:18 PM.