View Single Post
Old 05-16-2005, 06:24 PM   #3
cadiac
Registered User
 
Join Date: Jan 2004
Location: Wichita, Kansas 67212
Posts: 257
Removing a cab -Use the cab mount holes and rig a 4 way with 2 chains, -one at rear and one at front. 3/8" bolts front -5/16" at rear because the mount bolt cage nuts if they didn't rip loose are 3/8" -hence the 5/16" will pass through the nuts. (long obviously with BIG flat washers -grade 5 or "8" preferred! -Nothing LESS!!!) You'll have to play a bit to get it to come up reasonably straight. Have brake booster off and would be good for a/c stuff off front of firewall but not neccesary. I do it alone but would be good especially if its windy to have a helper. Roll window down and stick cherry picker in through it. You'll have to experiment with lengths a bit. "No Bent Gutters"!
cadiac is offline   Reply With Quote