Quote:
|
Originally Posted by bodydropped
i just bought a set off of here and there 3 inch well needless to say it lowered my truck way more than what i wanted and to top it all off if i run them on my truck again i have to have atleast 16s or bigger so my rims dont screw my lower a-frame up i drove it a block and my aframe was all cut up from them so make sure u want to go 3 inch or 2 inch
|
You can run 15" wheels if you grind the lower control arms to get the required clearance. I have run a set of 3" Belltech spindles for 1.5 years with 15" rallys with no problems after grinding the stock control arms. I drive my truck everyday and I don't baby it.
Most spindles I have seen are either 2.5" or 3" drop.