Quote:
|
Originally Posted by 68w/sbc406
you can just take the spindles out of the 84 and put them in the 69 control arms. you will need new ball joints and tie rods, but it will be worth it. also with disc you will need a new master cylinder and proportioning valve cause they are different between disc/drum and drum/drum
|
I used a complete cradle, spindles, disc brakes, etc from a 1979 c10 under my 69 GMC that was 4 wheel drum. I had to change a couple of brake lines from the master cylinder but I also added a modified disc rear end from a 1979 caddy. I used the prop valve from the caddy since it was 4 wheel disc but I used the stock master cylinder form my truck. It's a little hard to press the brakes but about as hard as it was to press with the drums. I'm fixing to modify it and and a power brake booster and master cylinder to make it a little easier.
__________________
If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!!
