The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Greenlee · 06-23-2005, 05:08 PM

I had the exact same problem. I used this black tar looking sealant that I got at Auto Zone across the entire seam under the cowl. That was close to two years ago and it hasn't leaked since. I don't remember what the stuff was called, but it came in a tube (red and white I think) and was made for windshields and such. It seems like it took 2 tubes.

Your floor looks as bad as mine was. I cut out the rust and welded in some new sheet metal.

I am still paranoid about it leaking and check it with a water hose when I wash the truck. So far its not leaking.

06-23-2005, 05:08 PM	#3
Greenlee Registered User Join Date: Jun 2004 Location: El Lago, TX Posts: 1,668	I had the exact same problem. I used this black tar looking sealant that I got at Auto Zone across the entire seam under the cowl. That was close to two years ago and it hasn't leaked since. I don't remember what the stuff was called, but it came in a tube (red and white I think) and was made for windshields and such. It seems like it took 2 tubes. Your floor looks as bad as mine was. I cut out the rust and welded in some new sheet metal. I am still paranoid about it leaking and check it with a water hose when I wash the truck. So far its not leaking. Last edited by Greenlee; 06-23-2005 at 05:14 PM.