The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Kopper · 06-29-2005, 04:15 PM

I'm installing drop spindles and a PSC front end kit in my 81 pickup. I removed the upper and lower control arms and I'm going to have them sandblasted and painted. I'd also like to sandblast and paint the front cross member. I was wondering if the motor mount brackets (the ones between the frame and crossmember) will support the motor with the crossmember out, or do I have to support the motor?

06-29-2005, 04:15 PM	#1
Kopper Registered User Join Date: Oct 2002 Location: Ontario, canada Posts: 138	Front Crossmember Question I'm installing drop spindles and a PSC front end kit in my 81 pickup. I removed the upper and lower control arms and I'm going to have them sandblasted and painted. I'd also like to sandblast and paint the front cross member. I was wondering if the motor mount brackets (the ones between the frame and crossmember) will support the motor with the crossmember out, or do I have to support the motor? Last edited by Kopper; 06-30-2005 at 10:29 PM.