The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OregonMike · 07-06-2005, 02:12 AM

Howdy Folks: I don't need the load capacity of 6700 GVW,
or the nose bleed I get at the stock (high) altitude.

Looks like 2" lower front springs and the rear spring shackle/hanger kit
will provide the drop I want, but all the vendors I checked don't
list these parts for C2500. Will these C1500 parts fit C2500? Vendor recommendations?

Second question, can I soften the rear leafs by removing the
shortest/thickest/lowest leaf?

Thx for your help. This is my first post here.

07-06-2005, 02:12 AM	#1
OregonMike Registered User Join Date: Jul 2005 Location: oregon Posts: 1	lowering/softening 3/4 ton '89 Howdy Folks: I don't need the load capacity of 6700 GVW, or the nose bleed I get at the stock (high) altitude. Looks like 2" lower front springs and the rear spring shackle/hanger kit will provide the drop I want, but all the vendors I checked don't list these parts for C2500. Will these C1500 parts fit C2500? Vendor recommendations? Second question, can I soften the rear leafs by removing the shortest/thickest/lowest leaf? Thx for your help. This is my first post here.