|
I drilled a hole directly under the a/c case to run my amps power wire.
It's low so it can't be seen from the engine compartment & you can route the wire directly to the batt on the inside of the front fender & keep things out of sight.
On the inside, the carpet ran high enough up the foot boards that the wire & grommet it went through are also out of sight & contained under the carpet.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|