I'm re-doing my front suspension and brakes -- going to all 72 components with dropped spindles from Early Classic. When I first added disc brakes I had no vacuum booster. When I finally added the booster, I was somewhat disappointed in the difference it made. And it really clutters up the engine compartment. However, Brothers Trucks and Master Power offer boosters that are smaller and mount closer to the firewall. They charge around $400 for the entire setup -- booster, brackets, master cylinder, prop valve, and related brake lines, which is a powerful argument for manual brakes!
------------------
MikeB
69 C-10 Fleetside, mild 383, Dart Iron Eagle 180cc heads, Crane Energizer 266 cam and 1.6 roller rockers, Edelbrock Performer manifold and 600cfm carb, HEI w/ MSD components, 1986 front spindles/disc brakes, Vintage Air in-dash, lowered 2"/3".
__________________
Mike
1969 C10 LWB -- owned for 36 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- converted from 250-six to roller cam 350, Vortec heads -- sold
1981 C10 Silverado LWB, 305, TH350C -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
|