The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-68 Bucket seat

Rod · 07-25-2005, 11:40 PM

Only other factory piece that ccould be made be made is this little metal piece that screws to the back of cab to also let the arm rest be inline with the rest of the seat positions. There was also a vecro tab that connected the seat to the back of cab in the up position.
Otherwise you got it all.

07-25-2005, 11:40 PM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Only other factory piece that ccould be made be made is this little metal piece that screws to the back of cab to also let the arm rest be inline with the rest of the seat positions. There was also a vecro tab that connected the seat to the back of cab in the up position. Otherwise you got it all. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.