The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - WTS-- Hei, performer intake, 4" ECE rear springs

Hotrod70C10 · 07-28-2005, 05:48 PM

I don't have pics at the moment.. waiting on a digi camera.

I've got a set of

4" Early Classic Rear drop springs $60
These were on my truck for a little over six months. Then I swapped to discs and went with a 4/6 drop.

Early 80's Remanu HEI- $50--
This came straight from the parts store i'm going to say 2 years ago max.

I just swapped this out for a Mallory Hei
This is a Complete Hei- Coil/vac adv/pigtail/cap/rotor

Edelbrock Performer - $50
Non EGR- fits 283-400 up to 86
This has been on my truck for about 1 1/2 years.
No stripped holes I purchased this new-

I don't have the room for this stuff and by the time I get another project I won't want this stuff. Post in the thread then pm me- I'll be checking back

07-28-2005, 05:48 PM	#1
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	WTS-- Hei, performer intake, 4" ECE rear springs I don't have pics at the moment.. waiting on a digi camera. I've got a set of 4" Early Classic Rear drop springs $60 These were on my truck for a little over six months. Then I swapped to discs and went with a 4/6 drop. Early 80's Remanu HEI- $50-- This came straight from the parts store i'm going to say 2 years ago max. I just swapped this out for a Mallory Hei This is a Complete Hei- Coil/vac adv/pigtail/cap/rotor Edelbrock Performer - $50 Non EGR- fits 283-400 up to 86 This has been on my truck for about 1 1/2 years. No stripped holes I purchased this new- I don't have the room for this stuff and by the time I get another project I won't want this stuff. Post in the thread then pm me- I'll be checking back __________________ 70' C-10 LWB Fleetside 4.5/6 drop Last edited by Hotrod70C10; 07-28-2005 at 06:07 PM.