The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mocwon · 08-04-2005, 08:46 AM

I did this swap and everything was not there. I had to drill many holes. This could be because I started with a 72 GMC leaf long-bed and swapped everything over to a 69 Chevy coil short-bed. I don't know enough about these trucks to say for sure. Just used the old frame as a pattern to measure where all the holes would need to be.

08-04-2005, 08:46 AM	#11
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	I did this swap and everything was not there. I had to drill many holes. This could be because I started with a 72 GMC leaf long-bed and swapped everything over to a 69 Chevy coil short-bed. I don't know enough about these trucks to say for sure. Just used the old frame as a pattern to measure where all the holes would need to be. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....