The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

fade94 · 08-05-2005, 10:45 AM

I have a 6 cyl out of an old parts truck that I want to put in my 71 while I have the 350 out. I have the motor mounts that were on the motor, but not the frame mounts or towers. What do the frame mounts look like? I have a set of V-8 mounts from a 72 I would trade locally for the 6 cyl frame mounts if this is what I need. I am pulling the motor to clean it up and replace the gaskets and do some engine bay detailing. But, I still need to be able to drive the truck, and let's face it, gas ain't cheap. The six "should" get better mileage...

08-05-2005, 10:45 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	350 to straight 6 conversion... I have a 6 cyl out of an old parts truck that I want to put in my 71 while I have the 350 out. I have the motor mounts that were on the motor, but not the frame mounts or towers. What do the frame mounts look like? I have a set of V-8 mounts from a 72 I would trade locally for the 6 cyl frame mounts if this is what I need. I am pulling the motor to clean it up and replace the gaskets and do some engine bay detailing. But, I still need to be able to drive the truck, and let's face it, gas ain't cheap. The six "should" get better mileage... __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 08-05-2005 at 11:32 AM.