The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*72longbed* · 08-10-2005, 04:25 PM

Finally got that measurement for the front leaf springs. They are 2.5" wide, so whoever has the plates with the drilled and tapped holes in them, let me know please. Also could use the sway bar itself and the mounting brackets that go to the front crossmember. (GM might have used the same plate for 2.5" and 3" front leaf springs?? Not sure, but definitely know there is a left and right side for the Dana 44.)

08-10-2005, 04:25 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Finally got that measurement for the front leaf springs. They are 2.5" wide, so whoever has the plates with the drilled and tapped holes in them, let me know please. Also could use the sway bar itself and the mounting brackets that go to the front crossmember. (GM might have used the same plate for 2.5" and 3" front leaf springs?? Not sure, but definitely know there is a left and right side for the Dana 44.) Last edited by 72longbed; 08-10-2005 at 04:28 PM.