The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 08-17-2005, 01:16 PM

FirstGen,

Can you tell me something? If you look in the first picture I have above, look at the final O² sensor just behind the cat or whatever at the end of the exhaust. About two inches above that on the bellhousing is an anodized Square. Is that where the hydraulic clutch line (from slave cylinder) will attach? It looks like a steel line there that's been cut. I'm guessing it should be coming with the pedal assembly, but I wasn't clear.

08-17-2005, 01:16 PM	#18
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	FirstGen, Can you tell me something? If you look in the first picture I have above, look at the final O² sensor just behind the cat or whatever at the end of the exhaust. About two inches above that on the bellhousing is an anodized Square. Is that where the hydraulic clutch line (from slave cylinder) will attach? It looks like a steel line there that's been cut. I'm guessing it should be coming with the pedal assembly, but I wasn't clear. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 08-17-2005 at 01:17 PM.