The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1BLU396 · 08-24-2005, 10:31 AM

I Work For Gm-have Access To A Lot Of Sh-t!, The Wheels Were From A 97'-secured To Wheel With Screws Through Back Of Wheel-the Hubs Come Through The Center Of The Cap Perfect If You Carefully Cut The Diameter Of The Bowtie Emblem In The Cap-rears Are No Problem...did Someone Say Beer, Btw, Anyone Have A Set Of Fr/rr 3-series Gears For Sale-these 4.10's Are Killing Me.

08-24-2005, 10:31 AM	#23
1BLU396 Registered User Join Date: Aug 2005 Location: COATESVILLE, PA Posts: 20	Center Caps I Work For Gm-have Access To A Lot Of Sh-t!, The Wheels Were From A 97'-secured To Wheel With Screws Through Back Of Wheel-the Hubs Come Through The Center Of The Cap Perfect If You Carefully Cut The Diameter Of The Bowtie Emblem In The Cap-rears Are No Problem...did Someone Say Beer, Btw, Anyone Have A Set Of Fr/rr 3-series Gears For Sale-these 4.10's Are Killing Me. Attached Images Last edited by 1BLU396; 08-24-2005 at 10:33 AM.