The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

matthufham · 09-01-2005, 09:41 PM

here i had this from a previous post

don't mind the blue marks. first push the clip in the direction of the arrow, and pry off arm in direction of it's arrow. more than likely it won't just come off, use pb blaster or oil and pull or pry hard. watch the paint on the cowl and you could bent the metal there if you pry too hard.

09-01-2005, 09:41 PM	#4
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	here i had this from a previous post don't mind the blue marks. first push the clip in the direction of the arrow, and pry off arm in direction of it's arrow. more than likely it won't just come off, use pb blaster or oil and pull or pry hard. watch the paint on the cowl and you could bent the metal there if you pry too hard.