The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How do you adjust the rear end on a 6 inch drop?

Tx Firefighter · 09-07-2005, 12:02 AM

You have to pry on the truck to shift the rearend over so the bolt will go into the hole. You need a long board or prybar to move the truck sideways as needed. Pry it to whichever way it needs to go to center the rearend. Then , adjust the rod to the correct length and insert the bolt.

09-07-2005, 12:02 AM	#18
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	You have to pry on the truck to shift the rearend over so the bolt will go into the hole. You need a long board or prybar to move the truck sideways as needed. Pry it to whichever way it needs to go to center the rearend. Then , adjust the rod to the correct length and insert the bolt. __________________ I'm on the Instagram- @Gearhead_Kevin