|
mooneyes4b i used 72 upper and lower balljoints with my 80 spindles with no problem...did i just get lucky?
upper balljoints n 71 and 72 are different design from 73-87, lowers are same part however, the difference from 72 to 73 uppers would be in the stud length and/or diameter, either too many threadsshowing or not enough, or loose fit into the spoindle tapered hole, or too tight fit in it,
id be worried and find out for sure that you have 71 72 uppers and 73-87 spindles, and if so then id be correcting that asap,,
good luck
|