The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67Fleet · 09-13-2005, 05:20 PM

1 coil usually will be 2 inches. 1 leaf should net approx. the same. It's a pain, but try one coil at first, if it's not as low as you want, then cut 1/2 coil at a time after that. It's better to have to go back and cut more than to cut too much and be screwed. When you take a leaf out, take out the one right on top of the overload leaf.

09-13-2005, 05:20 PM	#2
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	1 coil usually will be 2 inches. 1 leaf should net approx. the same. It's a pain, but try one coil at first, if it's not as low as you want, then cut 1/2 coil at a time after that. It's better to have to go back and cut more than to cut too much and be screwed. When you take a leaf out, take out the one right on top of the overload leaf. __________________ -Bret 67 short-fleet sold! Last edited by 67Fleet; 09-13-2005 at 05:21 PM.