The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jaredm82 · 09-14-2005, 09:07 PM

well, you drill new holes 2.5" higher than the origninal ones, then notch the frame were the idler arm and steering arm need clearance to move.

09-14-2005, 09:07 PM	#18
Jaredm82 Active Member Join Date: Jul 2005 Location: Ca Posts: 211	well, you drill new holes 2.5" higher than the origninal ones, then notch the frame were the idler arm and steering arm need clearance to move.