The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1972 · 09-21-2005, 04:15 AM

The yoke is supposed to be tight. Be sure the big nut that holds yoke to the shaft is tight. You will need to unhook the driveshaft to get to the nut.

09-21-2005, 04:15 AM	#4
1972 Majician Join Date: Nov 2004 Location: In the Middle Posts: 329	The yoke is supposed to be tight. Be sure the big nut that holds yoke to the shaft is tight. You will need to unhook the driveshaft to get to the nut.