|
More specific details on my transfer case shift pattern.....There are two (2) levers on the transfer case itself. The outer lever has three (3) positions and controls ratios with rear pos. = Lo, center pos. = Neutral, and forward pos. = Hi. The inner lever has only two (2) positions and when move forward engages the front driveshaft (4WD).
All five (5) positions are distinct and positive. I am sure there is not any partial engagement of gears, etc. The operation of the shifter is as follows:
Full forward = outer lever back (Lo), inner lever forward (4WD).
Position 2 = outer lever back (Lo), inner lever back (2WD).
Position 3 = outer lever center (neut), inner lever back (2WD).
Position 4 = outer lever forward (Hi), inner lever back (2WD).
Full Back = outer lever forward (Hi), inner lever forward (4WD).
The operation of the transfer case levers is function of the shift lever. I may try to get some pics. tomorrow since my cab is removed and everything is easy to see. Hopefully, someone can identify what type of shifter I have.
|