The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Livrat · 09-26-2005, 09:57 AM

you would need to include the servo which you have pictured.. the turn signal/cruise lever on the steering column or the dial on the dash (not sure which version your year has).. the speedo cable from the servo to speedometer, the wiring hooked to the servo which routes to the fuse panel, the vacumn lines and tees.. the brake pedal vacumn release switch and the little bracket that it touches.. its on the brake pedal,, the firewall vacumn pod and little chain that hooks to the carb, the little bracket on the carb that the chain hooks to, plus all the little nuts and bolts,, Hopefully I havent missed anything.. Anyone else have any input?

09-26-2005, 09:57 AM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	you would need to include the servo which you have pictured.. the turn signal/cruise lever on the steering column or the dial on the dash (not sure which version your year has).. the speedo cable from the servo to speedometer, the wiring hooked to the servo which routes to the fuse panel, the vacumn lines and tees.. the brake pedal vacumn release switch and the little bracket that it touches.. its on the brake pedal,, the firewall vacumn pod and little chain that hooks to the carb, the little bracket on the carb that the chain hooks to, plus all the little nuts and bolts,, Hopefully I havent missed anything.. Anyone else have any input? Last edited by Livrat; 09-26-2005 at 09:57 AM.