The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mikep · 08-26-2002, 02:22 PM

There are kits available. Theyre fairly pricy at around $70 or so. I went looking for one several months ago and found a few companies that offer them. Most were somewhat hokey setups that bolted an electric choke coil and housing to the manifold and used a rod to connect to the choke lever on the carb. Why not just go with a divorced choke setup? edelbrock sells a kit that bolts onto the hot air boss on their manifolds and it also works on cast iron manifold. I have one on my cast iron chevy manifold ( Later model canadian spec without EGR and with hot air choke boss) and it works great .

08-26-2002, 02:22 PM	#3
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	There are kits available. Theyre fairly pricy at around $70 or so. I went looking for one several months ago and found a few companies that offer them. Most were somewhat hokey setups that bolted an electric choke coil and housing to the manifold and used a rod to connect to the choke lever on the carb. Why not just go with a divorced choke setup? edelbrock sells a kit that bolts onto the hot air boss on their manifolds and it also works on cast iron manifold. I have one on my cast iron chevy manifold ( Later model canadian spec without EGR and with hot air choke boss) and it works great . __________________ No truck :-(