The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

greenhorn male · 09-30-2005, 08:35 PM

Not sure if they will work for you but I may have a couple of pairs of 73+ blazer bucket seat brackets (both drivers side) available pretty soon. They are taller than the 69-72 blazer brackets. I beleive the outer fronts will line up with the existing holes. They will both have the slider release on the left side so you may have to cut the passenger release arm after you set the seat distance or use the slider as is. I also have one passenger side without the back bracket but if your passenger doesn't wear a seat belt he will get launched through the windshield on a sudden stop

The total front height is 9" but you could probably modify the height.

09-30-2005, 08:35 PM	#3
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Not sure if they will work for you but I may have a couple of pairs of 73+ blazer bucket seat brackets (both drivers side) available pretty soon. They are taller than the 69-72 blazer brackets. I beleive the outer fronts will line up with the existing holes. They will both have the slider release on the left side so you may have to cut the passenger release arm after you set the seat distance or use the slider as is. I also have one passenger side without the back bracket but if your passenger doesn't wear a seat belt he will get launched through the windshield on a sudden stop The total front height is 9" but you could probably modify the height. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 03-30-2006 at 02:30 AM.