The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Working on the Valve cover, found a mystery wire

phlegm · 10-04-2005, 10:06 AM

Not sure if this falls under electircal, since its not an issue of the wires not working.

While working on the truck last night I found 3 wires and their termination clip all taped to the AC Compressor Bracket, not connected to anything. The wires run down the top of the engine just inside the Valve ccover in that grove, and are attached to the block with Clips.... any idea what this is supposed to connect to?

Thanks in advance

10-04-2005, 10:06 AM	#1
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Working on the Valve cover, found a mystery wire Not sure if this falls under electircal, since its not an issue of the wires not working. While working on the truck last night I found 3 wires and their termination clip all taped to the AC Compressor Bracket, not connected to anything. The wires run down the top of the engine just inside the Valve ccover in that grove, and are attached to the block with Clips.... any idea what this is supposed to connect to? Thanks in advance __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was