The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ChevLoRay · 10-08-2005, 07:02 PM

I'm gonna go with an aftermarket, plain tailgate....no CHEVROLET on it. Then, I'm gonna install a flip kit to place the handle on the inside of the gate, then finish off the outside so there's no hole. Following that, I'm gonna use two pieces of the lower tailgate trim, in line with the top and bottom of the tail light trim. Anything else that I do will be limited to some sort of logo, and it will be subdued, whether it's painted, a decal or an emblem.

10-08-2005, 07:02 PM	#6
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	I'm gonna go with an aftermarket, plain tailgate....no CHEVROLET on it. Then, I'm gonna install a flip kit to place the handle on the inside of the gate, then finish off the outside so there's no hole. Following that, I'm gonna use two pieces of the lower tailgate trim, in line with the top and bottom of the tail light trim. Anything else that I do will be limited to some sort of logo, and it will be subdued, whether it's painted, a decal or an emblem. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.