The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Fred T · 10-11-2005, 06:15 PM

It should not have paint on the splines. Also, the arm can only go on four ways, due to the splines. Last one I did was tight, so I lubed the splines with anti-sieze and jacked up the front of the truck to where the arm was somewhat parallel to the floor. Then I put a bottle jack under the arm and slipped it on.

10-11-2005, 06:15 PM	#10
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	It should not have paint on the splines. Also, the arm can only go on four ways, due to the splines. Last one I did was tight, so I lubed the splines with anti-sieze and jacked up the front of the truck to where the arm was somewhat parallel to the floor. Then I put a bottle jack under the arm and slipped it on. __________________ Fred There is no such thing as too much cam...just not enough engine.