The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cableguy0 · 10-17-2005, 01:38 AM

so long as the hoses are fitting right on the caliper side you should be fine. the banjo bolt should be in any auto parts store in the help section. the inside of the end of the brake hose if cut out it doesnt matter where the hole ends up on the banjo bolt. the copper washers should also be in the help section

10-17-2005, 01:38 AM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	Re: Help! Almost done with disc conversion so long as the hoses are fitting right on the caliper side you should be fine. the banjo bolt should be in any auto parts store in the help section. the inside of the end of the brake hose if cut out it doesnt matter where the hole ends up on the banjo bolt. the copper washers should also be in the help section __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.