|
shortblock
they cost $300 for an assembled rebuilt 350 short block here
add $15 brass freeze plugs
add $60 for hi vol oil pump screen and steel shaft
add $30 for pc lifters
request 69 flat top 4 valve relief pistons = no extra charge
double chain $25
gasket set $30
oil and filter $10
paint $5
reuse old cover and pan
1 gallon diesel before i paint $1.30
cam = I like 270 comp for street $99
cam #2 = the Erson tq20 is a bad mojo street cam
cam #3 = 280 comp
top half
I would run a nice set of double humps $300 to $400 ready to go
you already have intake
carb is ok I would prefer a holley 650 dp but can make due
I sell hei for $30
headers $85
ultra seal header gaskets $20
plugs cap rotor wires $50
set of long slot rockers $75
push rods $18
reuse old covers and waterneck
If you chose 280 you'll need a stall
boss hogg 3000 around $220
Spend leftover on a 125 NOS setup $400
fuel pump and cell $200
hit it with about 75 hp run it rich when spraying the reason I like 650 double pumper but your 600 will suffice
this setup is about as big as you can go without getting into driveability issues.
just a little over $2000.
Plan B
take $2000 and buy a running 454 and quit wasting time on them 350's
|