The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 6-lug Conversion Rotors Question?

FirstGen · 10-31-2005, 11:21 AM

I used the 88-98 ball joints on the stock 1/2 ton 67-72 upper control arm and then had to use a 3/4 TON 67-72 lower a-arms to make up for the difference in the spindle. Then I used a different outer tie rod which I will have to look up the number for...
-Taylor

10-31-2005, 11:21 AM	#14
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Re: 6-lug Conversion Rotors Question? I used the 88-98 ball joints on the stock 1/2 ton 67-72 upper control arm and then had to use a 3/4 TON 67-72 lower a-arms to make up for the difference in the spindle. Then I used a different outer tie rod which I will have to look up the number for... -Taylor __________________ 1968 C10 build in process TT LSA/6L90e/9"